CVA Optima Northwest Review

Home/Muzzleloader, Review/CVA Optima Northwest Review
  • cva optima northwest review featured 1

CVA Optima Northwest Review

Keep reading to get the details on my CVA Optima Northwest review.

Updated 15 October 2015

In preparation for deer season this year, I recently got a new muzzleloader: a CVA Optima Northwest. Very similar to the CVA Wolf Northwest, the Optima Northwest is part of a line of muzzleloaders designed by CVA that meet the legal requirements for use in Washington, Oregon, and Idaho and still provide the reliability and convenience of an in-line muzzleloader. This article is a review of my new CVA Optima Northwest.cva optima northwestI received my CVA Optima Northwest from, a company based out of Oregon that sells muzzleloaders and their accessories. I had a great experience with them when I purchased my CVA Wolf Northwest from them in 2014 and I have continued to do business with them ever since. Every person I have spoken to on the phone from the company was friendly and knowledgeable, they ship my orders quickly, and their prices are reasonable. Also, since they based out of Oregon, they don’t charge sales tax. Just FYI: sent me the CVA Optima Northwest free of charge in exchange for an honest review and comparison of the muzzleloader with the CVA Wolf Northwest.

cva optima northwest review cheek riserThe Optima is CVA’s mid-level break action muzzleloader, above the Wolf and below Accura. While the Wolf was a great muzzleloader and I was pleased with how it performed, the CVA Optima Northwest is a big step up from it.  The Optima has a 26″ fluted stainless steel barrel (compared to a 24″ non-fluted barrel on the Wolf), a reversible hammer spur to accommodate left or right handed shooters, an ambidextrous breech, molded cheek risers (see photo above) on both sides of the stock (absent on the Wolf), RealTree camouflage pattern stock (compared to a flat black stock on the Wolf), a very nice recoil pad, DuraBright fiber optic open sights, a quick release breech plug, a bullet guiding muzzle (see photo below) and is drilled and tapped for a scope.
cva optima northwest review muzzle
Like the other muzzleloaders in the CVA’s Northwest line, the CVA Optima Northwest has a modified breech plug that is compliant with the muzzleloader hunting regulations in Washington, Oregon, and Idaho. The breech plug is designed to work with loose (instead of pelletized) powder, use a musket cap (instead of a 209 primer), and has four holes cut into the sides of it (see photo below) to ensure that the ignition system is “exposed to the elements” in accordance with the regulations for muzzleloader season. By making these few adjustments to the Optima, CVA was able to design a muzzleloader that incorporates nearly all of the benefits of an in-line muzzleloader, while still being legal to use in the Pacific Northwest.cva optima northwest review breech plugJust as an aside: I highly recommend wearing eye protection whenever you are shooting the CVA Optima Northwest, to include when you are hunting. There is a pretty significant flash that comes out of those holes, which are just inches from your face, when the muzzleloader fires.

When I received my CVA Optima Northwest, I was immediately impressed by the obvious quality in the workmanship exhibited in the muzzleloader. The Optima is lightweight, easy to carry, and quick to mount. The breech opens easily and smoothly by simply depressing a lever at the rear of the trigger guard. The trigger is not great, but is still pretty good and is similar to the one on the CVA Wolf (maybe a little better). It’s smooth, breaks cleanly with 3-4 pounds of pressure, and has very little overtravel.

The CVA Optima Northwest has a 1:28” rifling twist, making it suitable for most full size (non-saboted) projectiles. CVA recommends using PowerBelt bullets. This is not surprising, considering they are made by the same company. However, conicals and sabots made by Thompson Center, Hornady, Barnes, and other companies will also work. However, CVA does recommend only using projectiles weighting less than 400 grains in the Optima Northwest for best results.

The CVA Optima Northwest is designed to use up to 150 grains of black powder or a black powder substitute, such as Hodgon’s 777 or Pyrodex. Under no circumstances should smokeless powder be used in the Optima Northwest (or any muzzleloader for that matter). However, even though the muzzleloader will safely handle up to 150 grains of black powder, that does not mean that using a maximum load of propellant will produce the best results. CVA recommends using 80-120 grains of black powder for best accuracy, though results will vary between different muzzleloaders.

So far, I’ve only shot two loads out of my CVA Optima Northwest: 250gr PowerBelt AeroLites and 290gr Barnes  T-EZs, both pushed by 100gr of Hodgon’s 777. I will try out some more loads as I get the chance.

As you can see in the photo below, the Optima Northwest shot both loads very well. Though the T-EZs impacted about 3.5″ lower than the PowerBelts at 100 yards, they were both very accurate. I measured the velocity of all my shots with a chronograph and there was very little difference in velocity between the two loads. The average velocity was 1,748 fps for the 250gr PowerBelts and 1,731 fps for the 290gr T-EZs.cva optima northwest review accuracyThe CVA Optima Northwest is very easy to clean. The “quick release” breech plug lives up to its name. Even after shooting it all day at the range, I never had any issues removing the breech plug using just my fingers. In between shots, and after finishing for the day at the range, cleaning the muzzleloader was a simple matter of removing the breech plug and running a few patches through the bore.

So far, I have not had a single issue with misfires or hangfires with my CVA Optima Northwest. The manual states that the rifle is designed for use with RWS Musket Caps and recommends their use. Because of this, I only use RWS Musket Caps and I recommend that you do so as well when shooting any of the muzzleloaders in the CVA Northwest line.

Also, by simply changing the breech plug and the firing pin system, the CVA Optima Northwest may be converted to use 209 primers. Since it is also drilled and tapped for a scope, it is a great choice for a hunter who hunts in multiple states with varying laws for hunting with muzzleloaders. For instance, I plan on using this muzzleloader in the northwest configuration to hunt deer in Washington this year. However, I can also mount a scope on it and switch over to 209 primers to use it to hunt deer in Texas (where that is legal).

Unfortunately, the CVA Optima Northwest is not perfect. The open sights that came with the CVA Optima Northwest are the same ones that are mounted on the CVA Wolf Northwest, which I consider to be of marginal quality. The fact that both the front and rear sights were fiber optic greatly enhanced their utility in low light conditions. However, the sights appear to be cheaply made and I had difficulty adjusting them precisely. In general, I do not like open sights, as they are the least accurate of all iron sights. Additionally, the rear sight is mounted near the middle of the barrel. This cut down on the sight radius and made it even less precise.cva optima northwest review rear sightFortunately, the E. Arthur Brown Company makes a reasonably priced peep sight/scope mount combination designed specifically for CVA muzzleloaders (Williams makes another good one). No special tools were needed for installation (just an Allen wrench) and it only took me a couple of minutes to install it. This peep sight is a tremendous step up in quality from the open sights. It mounts just in front of the breech plug, which increased the sight radius from 16” to 24 ½”. Additionally, this sight has the added benefit of allowing for the use of a scope (when legal) while still having the peep sight mounted.cva optima northwest review sightSo far, I’m extremely pleased with the performance of my CVA Optima Northwest and I think it is one of the best muzzleloaders currently available. With a price of $300-350, it is a great bargain for hunters in the Pacific Northwest who are interested in hunting during muzzleloader season, but who also want some of the conveniences associated with an in-line muzzleloader.

Still trying do decide? The video and table below provide a good description of the differences between the CVA Wolf Northwest, CVA Optima Northwest, and CVA Accura Northwest muzzleloaders.

ModelBarrel LengthOverall LengthWeightPrice
CVA Wolf Northwest24"39"6.25lbs$ at Cabela's
CVA Optima Northwest26"41"6.65lbs$$ at Cabela's
CVA Accura Northwest27"42"7.3lbs$$$ at Cabela's
Update 15 October 2015

I just got back from a deer hunting trip in eastern Washington where I shot a fat whitetail doe using my CVA Optima Northwest. It was cold and wet, but the CVA Optima Northwest did everything I asked it to do. Even though I had been hunting in cold weather and drizzling rain for a couple of days, it fired when I pulled the trigger. The shot was about 50-60 yards and my 250gr PowerBelt AeroLite hit her just behind the shoulder, right where I was aiming. She ran about 50 yards after the shot.

cva optima northwest review WT doeRating
Affordability: 4/5
Availability: 4/5
Performance: 4/5
Reliability & Durability: 5/5
Size & Weight: 5/5
Overall: 4.4/5

Interested in getting a CVA Optima Northwest for yourself? is selling them at a reasonable price.

If you liked this article on the CVA Optima Northwest, check out this article where I test out several popular hunting bullets in my CVA Wolf Northwest.

Enjoy this CVA Optima Northwest Review? Please share it with your friends on Facebook and Twitter.

Like what you see here? Follow me on Facebook The Big Game Hunting Blog, Twitter @TheBigGameHunt and on Instagram The_Big_Game_Hunter.

Endorsement Disclosure: Per the guidelines of the Federal Trade Commission, the product reviewed here is an endorsement and I received compensation by “in-kind” payment to review the product.

About the Author:


  1. Eric October 11, 2015 at 8:37 pm - Reply

    Excelent website! I stumbled across it and ended up reading about this CVA. I shoot an older knight KRB7 and like most everything about it sans the breechplug removal. Ive thought about one of these CVA’s and must take a closer look.

    Im curious to know if youve used blackhorn 209? Ive been using 777 like yourself and several others and am open to a new powder. I am changing bullets too as my old standby has been a powerbelt 295 grain hollow point copper plated. Im thinking of the new federal BOR as I hunt elk as well.

    Best regards and happy hunting!

    • John October 15, 2015 at 4:29 pm - Reply

      Though I’ve hard good things about it, I haven’t tried Blackhorn 209 because the manufacturer of the powder only recommends using it with 209 primers. Since a musket cap produces a smaller spark, I’m afraid I’ll have issues with misfires and hangfires if I try to use it in my NW Optima or Wolf. If you try it with success in conjunction with a musket cap, let me know and I might make the switch…

  2. Scott May 25, 2016 at 3:42 am - Reply

    I see you have both the CVA Wolf and Optima and after having a years worth of hunts and use on each one which one has made it to your top choice? You mentioned that the trigger is not that great on the Optima, how does it compare to the Wolf trigger? I’ve been considering getting Knight ultralight but price tag is hard to swallow especially if the CVA is a quality front loader.
    Best regards and straight shooting

    • John May 25, 2016 at 2:52 pm - Reply

      I think the trigger is about the same on both the Optima and Wolf. You’ll never mistake those triggers for the one on a 1911 with a custom job, but don’t get me wrong: they’re both pretty darn good for an off the shelf muzzleloader in that price range.
      All things considered, I’d say the CVA Optima Northwest is the better muzzleloader, even when taking into account the increased price.

  3. Ramon June 26, 2016 at 3:17 pm - Reply

    Great website and write up on the CVA muzzle loaders! I’m located in CA and just drew a muzzle loader either-sex deer tag so I have been doing a lot of reading and research to make the purchase. I’ve hunted plenty with modern rifle but wanted to try muzzleloading for the season advantages. I had a few questions I thought you may have some insight on.

    Is there a kit that makes a non-NW legal CVA muzzle loader legal, meaning there’s a NW breech plug and firing pin kit or does CVA only provide one to allow a NW legal muzzle loader to be converted to shoot 209 primers?

    Also, do you have an opinion on the replacement front sight from Lee Shaver (Global Sight Insert) when used with the rear peep sight? I saw it on this write up and was wondering if it would improve accuracy and target sight above and beyond the stock front sight?

    Really appreciate your write ups and website and will be following!


Leave A Comment