.35 Remington: Ultimate Guide To What You Need To Know

.

While the .35 Remington was extremely popular when first introduced in the early 1900s, the cartridge has fallen out of mainstream use in recent years. A loyal segment of hunters and shooters still use the cartridge, but most other hunters pass by the .35 Remington in favor of modern cartridges with more impressive ballistics on paper.

In my opinion, that is a big mistake.

The .35 Remington initially found favor among hunters seeking a good “brush bullet” and many deer, bear, elk, and even moose have fallen to the .35 Remington over the years. Don’t be fooled by it’s somewhat anemic looking ballistics on paper when compared to newer cartridges sporting fancy pointed tips and blazing fast velocities.

Those same characteristics that made the .35 Remington such an effective choice on really large animals during the 20th Century still ring true today. It never has been and never will be a good long range cartridge, but if anything, modern loadings using high quality bullets have further improved the performance of the .35 Remington on big game at short to moderate range.

In this article, I’m going to conduct a detailed analysis of the .35 Remington in an effort to cut through some of the myths and misunderstandings out there regarding the capabilities of the cartridge so you can make an informed decision regarding whether or not you should hunt with one.

Before we get started, I have an administrative note: Some of the links below are affiliate links. This means I will earn a small commission (at no extra cost to you) if you make a purchase. This helps support the blog and allows me to continue to create free content that’s useful to hunters like yourself. Thanks for your support.

Additionally, I recorded an entire podcast episode on this exact subject. If you’d rather listen than read, click the appropriate link below to listen to this episode on your preferred podcasting service.

Be sure to hit that “Subscribe” button in your podcast player!

Subscribe

Apple | GoogleiHeart | PandoraSpotify

.35 Remington History

Remington introduced the Remington Auto-Loading Rifle (later known as the Remington Model 8) in 1906. Along with the rifle, they introduced four new rimless cartridges: the .25 Remington, the .30 Remington, the .32 Remington, and the .35 Remington.

Of the four rifle cartridges introduced with the Remington Model 8, the .35 Remington was by far the most popular and is the only one still in production.

.35 Remington Ballistics

Since it had no competitor at the time, and since it filled an important “medium bore” niche, the .35 Remington quickly caught on with hunters in the United States. The original load of the cartridge propelled a 200 grain, .35 caliber, bullet at just under 2,100 feet per second.

The original .35 Remington load generated over 1,900 foot pounds of energy and quickly became a favorite among American hunters.

Particularly when used in a high quality rifle, the .35 Remington is capable of pretty darn good accuracy and I’ve shot many nice groups with an off the shelf Remington Model 81. However, the biggest shortcoming in the cartridge is limited effective range.

Even when using loads on the upper end of the performance envelope for the cartridge, the .35 Remington still has a relatively slow velocity and low ballistic coefficient. As a result, the cartridge does not have a very flat trajectory.

Realistically, the maximum effective range for the .35 Remington for most shooters is 200 yards. Depending on the load, 150 yards may be a better estimate.

So, in recognition of both the strengths and weaknesses of the cartridge, the .35 Remington gained a good reputation among American hunters seeking an effective “woods cartridge” for pursuing game in areas where shots inside 100 yards were the norm.

The .35 Remington was extremely effective in that role.

Remington marketed the cartridge as a superior alternative to another extremely popular cartridge that excelled under those same circumstances: the venerable .30-30 Winchester.

35 Remington vs 30-30

A typical 35 Remington factory load (200gr bullet at 2,080fps) has about 5% more energy than a normal 30-30 factory load (170gr bullet at 2,200fps). The 35 Remington also uses a bullet about 18% heavier and with over 35% more frontal surface area (.1007 vs .0745 square inches).

These seemingly small differences added up to a significant difference in power and effectiveness on game between the two cartridges. In particular, the .35 Remington offers a marked advantage over the .30-30 Winchester when hunting very large, tough, and/or dangerous game like moose and grizzly bear.

picture of 7-30 waters vs 30-30 winchester vs 35 remington
30-30 Winchester vs 7-30 Waters vs 35 Remington

Remington made great efforts to promote the power of the .35 Remington by featuring the cartridge, along with their revolutionary new semi-automatic rifle, in many advertisements during the first half of the 20th Century. These advertisements typically featured hunters fearlessly facing down wolves and grizzly bears with their trusty Remington Auto-Loading Rifle chambered in the potent .35 Remington cartridge.

picture of 35 remington

Other Remington posters publicized the ability of the cartridge to penetrate a 5/16″ of steel plate, a feat the .30-30 Winchester could not match.

best hunting caliber e book 1

.35 Remington Ammo

Remington, Winchester, Federal, Hornady, and Buffalo Bore, among others, currently offer a handful of different .35 Remington ammo options. The most common load is a 200gr round nose soft point traveling between 2,000 and 2,100 feet per second.

For those interested in wringing out all of the power available in the .35 Remington, there are a couple of other .35 Remington ammunition options besides the standard 200gr soft point loads listed above. For instance, Remington also sells 150gr load that produces velocities around 2,300 feet per second.

Hornady also produces their “LEVERevolution” line of ammunition, which uses their Flex Tip Expanding (FTX) bullet. The FTX bullet has a pointed, flexible, polymer tip that has a higher ballistic coefficient than the flat tipped or round nose bullets the cartridge normally uses.

LEVERevolution bullets, unlike most bullets with pointed tips, are also safe to use in rifles that have tubular magazines (like the Marlin 336). The 200 grain bullet has an advertised muzzle velocity of 2,225 feet per second and a muzzle energy of 2,198 foot pounds.

Buffalo Bore also produces 220gr loads that they claim reach a velocity of 2,200 feet per second (2,364 foot pounds).

This is a very stout load for the .35 Remington.

Both of these .35 Remington ammo choices offer slight improvements over typical factory loads. However, they are high pressure loads and should only be used in modern firearms, such as the Marlin 336, that are in good condition.

BUY SOME MORE QUALITY 35 REM AMMO HERE

picture of 35 remington vs 30-06
Hornady LEVERevolution (L) and Remington Core-Lokt (R) compared to a .30-06

.35 Remington Rifles

In addition to the semi-auto Remington Model 8 and 81, Remington also produced the Model 14 pump-action rifle chambered in the cartridge. A very small number of Winchester’s legendary bolt-action pre-64 Model 70 rifles were manufactured in .35 Remington as well.

Thompson Center also manufactures their break action, single shot Contender pistol in .35 Remington for handgun hunters who love the cartridge. Henry Repeating Arms currently manufactures a model in .35 Remington as well.

However, the most popular rifle chambered in .35 Remington is the Marlin Model 336 lever-action rifle.

At this time, Henry and Marlin are the only two companies I’m aware of that produce new rifles in the cartridge.

BUY A NICE 35 REMINGTON RIFLE HERE

What Can You Hunt Using The .35 Remington?

Even when using the standard factory loads, the .35 Remington is an outstanding round for use on medium sized game such as whitetail deer, feral hogs, and black bear at short ranges. At ranges less than 100 yards, like when hunting whitetail deer or black bear in thick cover, the cartridge excels and is absolutely deadly on big game.

The heavy, slow moving bullets deliver bone crushing power and do not produce large amounts of ruined, blood shot meat that high velocity cartridges do. Additionally, the .35 Remington will perform adequately on larger game such as elk, grizzly bear, brown bear and moose.

It’s even more effective when using some of the hotter loads (like those from Buffalo Bore) available on the market.

Especially when used in handy, quick pointing rifles such as the Marlin 336, the .35 Remington really comes into its own when used in thick cover. For this reason, the .35 Remington is most popular in the northeast and southeast regions of the United States where shooting ranges are short.

When hunters there really need to make a rapid shot and anchor their game quickly, they can rely on a Marlin 336 chambered in .35 Remington. Because of its power and versatility, many generations of hunters from states as varied as Maine, North Carolina, Texas, and Georgia have successfully hunted deer, moose, bear, and hogs (like the one in the photo below) with the .35 Remington.

For a more detailed discussion on .35 Remington hunting ammunition, read this article:

Best .35 Remington Ammo For Hunting Deer, Bear & Other Big Game

35 remington hog hunting

Another interesting tidbit about the .35 Remington is the alleged use of a Remington Model 8 chambered in the cartridge by legendary Texas Ranger Frank Hamer in the final ambush that killed Bonnie & Clyde in 1934. However, historians are conflicted on the subject and there are several different stories about what rifle Hamer actually used.

We’ll probably never really know for sure, but it is certainly possible that he used a Remington Model 8 in the famous shootout, though it very likely did not have an extended magazine (as alleged by some sources).

Even though it does not sport the sexy pointed bullets and high velocities of some of the more popular cartridges on the market today, the .35 Remington still maintains a healthy following among American hunters. It is true that the cartridge has its limitations, but used under the right circumstances, it is an outstanding choice. If we’re being honest with ourselves, the majority of American hunters, especially in the south and northeast, will take only a handful of shots at big game at ranges past 100 yards in their lifetime. For those close range shots, the trusty old .35 Remington has few equals.

Are you just itching to take a rifle chambered in .35 Remington on a hunt?

Book an incredible black bear hunt here.

Book an outstanding African safari hunt here.

If you’d like to read a more detailed discussion on a couple of other .35 caliber cartridges, read the articles below:

338 Federal vs 308 Winchester vs 358 Winchester: What You Need To Know

35 Whelen: The Poor Man’s Magnum

America’s “Other Levergun” by Glen E. Fryxell, The Great Model 8 & 81 by Richard Jones, Bullet Frontal Area List, by Chuck Hawks, and the Lyman 50th Edition (p309-310) and Hornady 10th Edition (p682-683) reloading manuals were used as references for this article.

Enjoy this article on the .35 Remington? Please share it with your friends on Facebook and Twitter.

Make sure you follow The Big Game Hunting Blog on FacebookInstagramTwitter, and YouTube.

NEXT: 30-30 vs 45-70 WHICH LEVER ACTION IS BEST FOR YOU TO HUNT WITH?

NEXT: THE 9.3x62mm MAUSER: AN UNDERRATED BIG GAME HUNTING CARTRIDGE CARTRIDGE

NEXT: 101 BEST GIFTS FOR HUNTERS

65 thoughts on “.35 Remington: Ultimate Guide To What You Need To Know”

  1. My first deer rifle I owned, and still do, is a Remington Model 760 chambered in 35 Remington. Numerous deer have met their maker with that gun. I love how it handles and it shoots like a dream. Great caliber. Still use it when feeling nostalgic. Makes me feel like a kid again.

    Reply
  2. The 35 Rem holds a special place in my heart, hunting the north woods of Wisconsin, when i dont want to mess around using my 7mm or 270 i go to the trusty 35rem, its my Whitetail slayin rifle, my 35 blows away my other rifles when i gotta put meat in my freezer i get out the old 35 pumkin smasher i call it.

    Reply
  3. Thanks for all the info. on the 35 Rem. Very interesting. I’ve had a 336 Marlin, 35 rem. ( JC Higgens ) and just purchased a Rem. 760, 35 Rem. Found the info. I was looking for.

    Thank You !

    Reply

Leave a Comment